Pro-Do-Mix Industrial Mixers & Agitators
 

 

Industrial Mixer Impellers

 

 
Impeller with 4 blades inclined at 45 / PITCHED Impeller with 4 blades inclined at 45 / PITCHED

Used primarily in Water treatment applications, and is widely used for its excellent connection cost-performance.

Available in diameters ranging from 200 to 2000mm. 

It is possible to build it in 2 separate parts.


 

Impeller Type 3PM-0134 / HURRICANE - Sabre Profile Impeller Type 3PM-0134 / HURRICANE

3 Blade Impeller with sabre profile offering a high hydrodynamics profile. 

Its the most popular sabre impeller on the market.

Available in diameters ranging from 900 to 1500mm. 

It is possible to build it in 3 separate parts.

 


 

Impeller Type 3PM-1084 / EXCELLENT Impeller Type 3PM-1084 / EXCELLENT

3 Blade Impeller with sabre profile offering a high hydrodynamics profile. 

Compared to other impellers it requires the lowest torque.

The EXCELLENT creates the highest flow rate for the lowest peripheral value.

Perfect for crystallisation, flocculation, and applications in blending viscous products.

Great for creating prevalence when ducted for recirculation of sludge, carbonation, and clari-flocculation.

Available in diameters ranging from 200 to 3200mm. 

It is possible to build it in 3 separate parts.


 

Impeller Type 3PM-0242 / MASTER Impeller Type 3PM-0242 / MASTER

3 Blade Impeller with sabre profile offering a high hydrodynamics profile. 

Its design produces a centrifugal effect and the impeller is defined as "self cleaning".

Typically used in denitrification applications

Available in diameters ranging from 1600 to 3400mm. 

It is possible to build it in 3 separate parts.


 

Impeller Type 3PM-0030 / EVOLUTION Impeller Type 3PM-0030 / EVOLUTION

3 Blade Impeller with sabre profile offering a high hydrodynamics profile. 

Its a variant of Hurricane impeller and due to the internal velocity gradient of the impeller enables the positioning of impeller with large diameters close to the bottom of tank.

Perfect for applications where the mixer must run while totally emptying the tank.

Available in diameters ranging from 1650 to 3500mm. 

It is possible to build it in 3 separate parts.

 


 

Impeller Type 2PM-0650 / PREMIUM Impeller Type 2PM-0650 / PREMIUM

2 Blade Impeller with sabre profile offering a high hydrodynamics profile. 

Its a variant of Excellent impeller for applications in which the impeller must gently agitate a shear sensitive fluid utilising a large surface area and low speed.

The design prevents the separation of the fluid from the blade thereby reducing the shear effect on the fluid.

When combined with the speed variation, this mixer offer the best solution to handle applications such as waste water flocculation and similar.

Available in diameters ranging from 800 to 3000mm. 

It is possible to build it in 2 separate parts.

 


 


Sealant Equipment & Engineering   Fluid Metering   Liquidyn   Doseuro